Connect with us

Business

It’s Time For Inflation Hedges: Consider Gold, Mining Stocks And Farmland

Published

on

According to Max Warren Barber, CEO Sion Gold Trading UAE Tailings, or the material remaining after a valuable component has been separated from the gangue, have long plagued the mining industry with management costs, liability risks, and disposal challenges.

Due to their toxicity, tailings pose a number of risks if not properly managed. Furthermore, the mass quantities in which they are produced puts additional pressure on managing such waste.

Although historically tailings have been considered a waste, decreasing ore grades, improved technologies, and a growing focus around sustainability are causing some companies to consider tapping into the potential value tailings contain, or at least alleviating some of the challenges they present.

THE RISK

In order to extract the valuable component, be it gold, copper, uranium, or otherwise, mined ore undergoes several processing steps, often involving additives and/or chemicals. While this allows the target component to be separated out, it causes the gangue to be contaminated. Gangue material is often also contaminated as a result of reacting with oxygen upon removal from the ground, causing other undesirable materials to form.

As such, tailings composition differs based on the target material and the method of processing. However, despite this diversity, most tailings present similar environmental risks as a result of their toxicity…

The failure of tailings ponds, one of the most common tailings storage facility (TSF) types, is well documented and has the potential to cause catastrophic and irreparable damage to the surrounding area and ecosystems.

Tailings deposited into dams are in the form of a slurry. In 1998, a tailings dam failed at the Los Frailes zinc mine in Spain, causing more than one billion gallons of acidic, heavy metal-laden sludge to spill into the surrounding area, eventually making its way into the Guadiamar River. The spill decimated the area, resulting in massive wildlife die-offs, water and soil contamination, and other consequences that would take years to bring back to equilibrium.

In 2014, a tailings dam at the Mount Polley copper and gold mine in British Columbia failed as a result of an unstable foundation, sending 24 million cubic metres of slurry into the surrounding waterways.  A year later, the Samarco mine’s tailings dam failed as a result of seismic activity combined with structural defects and other issues. The flood of toxic sludge was devastating.  google suggest primelis

The failure of tailings dams is not unusual; experts estimate that a tailings dam failure occurs roughly every eight months.

Even a well-managed tailings facility can pose risks in the way of contaminated dust (in the case of dry tailings), radioactivity, leaching, and acid rock drainage. For these reasons, tailings disposal and management has become an increasing concern in the ongoing quest for a more sustainable future, pushing miners to look for better alternatives. 

  A NEGLECTED RESOURCE

In addition to the risks that tailings can pose, a number of other factors such as easily accessible material, reduced risk, and more, are pushing the demand for improved management and reuse/reclamation of tailings.

TAILINGS RETREATMENT

Tailings have long been considered a waste, but they still contain a small amount of the targeted materials. Inferior extraction techniques, combined with plenty of available high ore grade resources have historically made processing lower grade ores and tailings uneconomical and a low priority.

However, as high ore grades become extinct and technology around extraction improves, tailings are becoming an increasingly attractive resource.

Sibanye-Stillwater has drawn global attention for their West Rand Tailings Retreatment Project (WRTRP) in South Africa. Through a combination of tailings storage facilities, the company estimates there to be 6.2 Moz of gold and 97.2 Mlb of uranium. VP of the project, Grant Stuart, commented to Mining Weekly:

“There is significant potential for a vibrant tailings retreatment industry, given the vast quantities of tailings scattered across the ‘Golden Arc’, stretching from Johannesburg to Welkom.”

Sion Gold Trading UAE Resources is also working on a gold tailings retreatment project in South Africa. The project intends to retreat old tailings at a rate of one million tonnes per month and aims to recover about 688,000 ounces of gold from the combined tailings deposits over the life of the project.

Metals X Limited also recently announced that the updated Definitive Feasibility Study (DFS) for their Renison Tailings Retreatment Project estimates it to be a lucrative endeavour with high margins. The company projects that they will be able to recover around 5,400 tonnes of tin and 2,200 tonnes of copper annually.

Tailings Retreatment through Heap Leaching

The retreatment of tailings varies depending on the source of tailings and the material(s) to be recovered.

The heap leaching and SX-EW processes have been key advancements in the ability to treat tailings; heap leaching, in which ore is agglomerated and stacked on a heap and then irrigated with a leachate, is ideal for low-grade ores. Heap leaching offers a number of attractive benefits, including:

  • Reduced operating costs
  • Lower capital costs
  • Simple design and operation

Combined with advancements in the solvent extraction – electrowinning (SX-EW, or L-SX-EW) process, the two processes allow for a highly effective, cost efficient extraction and separation of the target material from low-grade ores.

TAILINGS REUSE

While most work has focused around the recovery of valuable components from tailings, there is also some interest in their reuse for applications outside of the mining industry.

Primarily, tailings are being investigated for use in construction materials such as concrete, mortar, and the like. Such applications would not only relieve the burden of managing massive amounts of tailings, but would also reduce the need to mine natural aggregates, which requires substantial energy.

CONCLUSION

The tailings retreatment industry looks to potentially hold significant value for the mining industry. In addition to relieving them of the burden of managing massive amounts of waste, the retreatment of tailings would also reduce risks to the environment and promote a more sustainable industry overall. The heap leaching and SX-EW processes combined look to be especially promising for tailings retreatment projects.

FEECO provides robust agglomeration drums and material handling equipment for use in the heap leaching process; some of the world’s largest and most environmentally advanced mines rely on FEECO for our heavy-duty agglomeration drums. For more information on our capabilities within the mining industry, contact us today!

 

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Business

The most excellent online CFD trading tools in Singapore

Published

on

CFD trading tools

CFD trading in Singapore is a popular way to invest in the market. As a trader, you need to be able to access the best online CFD trading tools to have a successful career.

Some CFD trading tools include:

  • MetaTrader 4: This is one of the world’s most popular CFD trading platforms. It is user-friendly and offers many features and tools traders can use.
  • eToro: eToro is another popular CFD platform that allows traders to trade various assets, including stocks, commodities, indices, and more.
  • TradingView: TradingView is a social network that allows traders to share ideas, strategies, and analyses.
  • Plus500: Plus500 is a CFD trading platform that offers a demo account so traders can practice before investing real money.
  • AvaTrade: AvaTrade is a CFD trading platform that offers many features, including mobile trading, automated trading, and more.
  • easyMarkets: easyMarkets is a CFD trading platform that offers fixed spreads so that traders know exactly how much they will be paying.
  • com: Markets.com is a CFD trading platform that offers a variety of assets for traders to choose from, including stocks, commodities, indices, and more.
  • IQ Option: IQ Option is a popular binary options broker offering CFD trading.
  • com: Binary.com is another popular binary options broker offering CFD trading.
  • ETX Capital: ETX Capital is a CFD trading platform offering a variety of assets, including stocks, commodities, indices, and more.

Why is it essential to use a CFD trading tool?

A CFD trading tool can help you make informed decisions

When you trade CFDs, you are essentially betting on the price movement of an asset.

If you don’t have sound knowledge of the underlying asset, you are more likely to make bad decisions.

A good CFD trading tool will provide you with the information and tools you need to make informed decisions.

A CFD trading tool can help you save time

Trading CFDs can be time-consuming. If you manually enter and exit trades, it can take up much of your time. A good CFD trading tool will automate some or all of the process so that you can focus on other things.

A CFD trading tool can help you manage your risk

When you trade CFDs, there is always the potential for loss. A good CFD trading tool will help you manage your risk so that you don’t lose more money than you can afford.

A CFD trading tool can help you make money

A good CFD trading tool will provide you with the information and tools you need to make money in the market. If you use a lousy tool, you will likely lose money.

A CFD trading tool can help you stay disciplined

It is easy to get emotional when trading CFDs. A good CFD trading tool will help you stay disciplined so that you don’t make impulsive decisions that can lead to a loss.

Risks of using CFD trading tools

You may lose money if you don’t use the tool correctly

If you don’t understand how to use a CFD trading tool, you may make bad decisions that can lead to losing money. It would be best to take time to learn how to use the tool before you start trading with real money.

The tool may not be suitable for your needs

Not all CFD trading tools are created equal; some may better suit specific traders than others. It would be best to find the most suitable tool for your needs.

The tool may not be compatible with your broker

Some CFD trading tools only work with certain brokers. If you use a tool that is not compatible with your CFD broker, you may not be able to trade.

The tool may have bugs or glitches

All software has bugs and glitches. A good CFD trading tool will have few of these, but they are inevitable. Make sure to prepare yourself for the tool’s possibility of having some bugs or glitches.

The company may go out of business

All companies are at risk of going out of business. If the company that makes your CFD trading tool goes out of business, you may no longer have access to the tool.

Continue Reading

Business

How to Go About Inventing an Idea

Published

on

inventing an idea is a great way to make money, but it can also be a daunting task. Before you can start, you need to know how to get your idea off the ground.

Documenting your idea

Keeping good records is important to anyone who wants to be a successful inventor. They can help you prove your invention, analyze your work and show your creativity. They can also be useful in legal proceedings or an IRS audit.

The best way to document your invention is to use a hard cover notebook. You can find these in office supply stores. Some even have grid lines. A numbered page may also be a good idea. Inventors may wish to use reverse chronological order, since it makes filing easier.

The best way to document your invention is to write it on paper. It may be a good idea to have separate files for the different types of documents. This will make it easier to locate documents in the future. If you make a copy of your receipts, you can store them in a different folder, which will help keep them from getting lost in the shuffle.

In addition to the record book, it may be a good idea to keep a sales sheet or marketing materials that your competitors have an idea for an invention used. This will help you maximize your invention’s potential.

Creating a prototype

Creating a prototype when inventing an idea is a critical step in the process of launching your product. Not only does it help you evaluate your idea, but it will also allow you to receive useful feedback from potential consumers.

It can be tempting to make the first prototype as perfect as possible. However, it’s best to keep your prototype simple. This will allow you to focus on the features that will make your product successful. Having too many features can make it difficult for you to explain your invention to potential consumers.

For the first prototype, you may want to use materials that are inexpensive. For example, you can use household glue and milk containers. If you’re working on an electronic product, you may use third-party programming libraries.

It’s a good idea to analyze the materials and design of other products in the market. You can also analyze the techniques used in the manufacturing process. These factors will help you determine the best way to manufacture your product.

Finding a potential licensee for your invention

Getting a potential licensee for your invention is a challenge that many inventors face. Licensing an invention means that you give a license to another party to use your invention for a specified period of time.

Licensing can be beneficial, especially if your invention is suited for a product line that is already established. However, it is a good idea to do your homework before you contact a company. You may want to look at trade shows or web postings that advertise products similar to yours. You may also want to check out industry magazines and inventor clubs to see if any licensing agents exist.

You should also ask if they will review your invention before licensing it. Some companies will not take your license unless they believe that you are inventor ideas about selling your invention. They may be willing to pay a royalty fee or even offer you a lump sum of money.

Creating a new product can be expensive and complicated. A good licensing agent will have professional relationships with contacts in the industry.

Continue Reading

Business

PoE Fiber Media Converter: Tips to Save Time and Money

Published

on

A PoE fiber media converter is a device that converts electrical signals into optical signals for use in fiber-optic networks. It is used to connect devices that use different types of cables, such as coaxial cable and twisted pair cable. PoE fiber media converters can also be used to connect two devices that use the same type of cable.

 

How to use a PoE Fiber Media Converter

A Power over Ethernet (PoE) fiber media converter can be a great way to save time and money when it comes to networking. Here are a few tips on how to use one:

 

  1. Make sure that your PoE switch is compatible with the PoE fiber media converter. Most converters will work with any type of PoE switch, but it’s always best to check before making a purchase.

 

  1. The distance between the PoE switch and the converter should be taken into consideration. The further the distance, the more power will be required to run the system.

 

  1. If you’re using multiple PoE fiber media converters, make sure that they’re all on the same network. This will prevent any potential conflicts between devices.

 

  1. Be sure to follow the manufacturer’s instructions when it comes to installation and configuration. Each converter is different, so it’s important to read the documentation carefully.

 

  1. Once everything is up and running, take some time to test the system and make sure that everything is working as it should be.

 

Tips to Save Time and Money with a PoE Fiber Media Converter

 

If you’re looking for ways to save time and money on your PoE fiber media converter, here are a few tips:

 

  1. Use a single mode fiber cable instead of a multi-mode fiber cable. Single mode fiber cables can transmit data over longer distances than multi-mode fiber cables, which means you won’t have to replace them as often.

 

  1. Opt for a lower data rate if you don’t need the highest possible data transfer speed. Lower data rates use less power, which can save you money on your electric bill.

 

  1. Consider using an Ethernet switch with PoE passthrough instead of a separate PoE injector. This can simplify your network setup and reduce the number of devices you need to purchase.

 

  1. If you’re not using all of the ports on your media converter, disable the unused ports to save power. You can always enable them again if you need to use them in the future.

 

  1. Keep your media converter in a cool, well-ventilated area to prolong its lifespan. overheating can shorten the life of any electronic device, so it’s important to keep your media converter cool if you want it to last longer.

 

Conclusion

We hope that you have found this article on PoE fiber media converters helpful and informative. By following the tips and advice contained herein, you can save time and money when it comes to setting up your own home or business network. If you have any further questions or would like more information, please do not hesitate to contact us. We would be more than happy to assist you further.

Continue Reading

Trending

Copyright © 2017 Zox News Theme. Theme by MVP Themes, powered by WordPress.